A review of bioanalytical methods for chronic lymphocytic leukemia drugs and metabolites in biological matrices

Quantitation of drugs used for the treatment of chronic lymphocytic leukemia in various biological matrices during both pre-clinical and clinical developments is very important, often in routine therapeutic drug monitoring. The first developed methods for quantitation were traditionally done on LC in combination with either UV or fluorescence detection. However, the emergence of LC with mass spectrometry in tandem in early 1990s has revolutionized the quantitation as it has provided better sensitivity and selectivity within a shorter run time; therefore it has become the choice of method for the analysis of various drugs. In this article, an overview of various bioanalytical methods (HPLC or LC–MS/MS) for the quantification of drugs for the treatment of chronic lymphocytic leukemia, along with applicability of these methods, is given.     

Optimizing the monomer structure of polyhedral oligomeric silsesquioxane for ion transport in hybrid organic–inorganic block copolymers

Poly(ethylene oxide)-b-polyhedral oligomeric silsesquioxane (PEO–POSS) mixed with lithium bis(trifluoromethanesulfonyl)imide salt is a nanostructured hybrid organic–inorganic block copolymer electrolyte that may enable lithium metal batteries. The synthesis and characteristics of three PEO–POSS block copolymer electrolytes which only differ by their POSS silica cage substituents (ethyl, isobutyl, and isooctyl) is reported. Changing the POSS monomer structure results in differences in both thermodynamics and ion transport. All three neat polymers exhibit lamellar morphologies. Adding salt results in the formation of a disordered window which closes and gives way to lamellae at higher salt concentrations. The width of disordered window decreases with increasing length of the POSS alkyl chain substituent from ethyl to isobutyl and is absent in the isooctyl sample. Rheological measurements demonstrate good mechanical rigidity when compared with similar all-organic block copolymers. While salt diffusion coefficient and current ratio are unaffected by substituent length, ionic conductivity increases as the length of the alkyl chain substituent decreases: the ethyl substituent is optimal for ion transport. This is surprising because conventional wisdom suggests that ion transport occurs primarily in the PEO-rich domains, that is, ion transport should be unaffected by substituent length after accounting for the minor change in conducting phase volume fraction. © 2020 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2020 © 2020 Wiley Periodicals, Inc. J. Polym. Sci. 2020 , 58, 363–371     

Investigation of segmental reorganization within amphiphilic block polymer nanoparticles derived from shell crosslinked micelle templates: Shell crosslinked knedel-like inversion

The construction of nanoscopic materials by synthetic methodologies that iterate covalent and supramolecular interactions has been developed over the past three decades as a powerful method to afford complex functional materials. Indeed, the present study was nearly lost in the archives of dissertation research completed in 2001, which revealed nanoscale conformational dynamics in the segmental reorganization, and partial inversion, of topologically shell crosslinked knedel-like (SCK) nanoparticles. © 2019 Wiley Periodicals, Inc. J. Polym. Sci. 2020 , 58, 204–214     

Synthesis of Heat-resistant Polymers by Thiol–Ene Reaction of N-Allylmaleimide Copolymers Using Glycoluril Crosslinkers with Rigid Molecular Structures

We carried out the thermal curing of the copolymers of N-allylmaleimide (AMI) and 2-ethylhexyl acrylate (2EHA) using 1,3,4,6-tetra(2-mercaproethyl)glycoluril ( G1 ), 1,3,4,6-tetra(3-mercaptopropyl)glycoluril ( G2 ), 1,3,4,6-tetraallylglycoluril ( G3 ), triallylisocyanurate (TAIC), and pentaerythritol tetrakis(3-mercaptobutyrate) (PEMB) as the crosslinkers. Based on the results for the analysis of thiol–ene reactions monitored by IR spectroscopy, it was confirmed that the curing rate significantly depended on the combination of the used crosslinkers. The insoluble fraction after curing was more than 90% for the systems using the glycoluril crosslinkers, while the conversion of the allyl groups was suppressed due to the rigid structure of these crosslinkers. The heat resistance and the mechanical properties of the crosslinked polymers were investigated by thermogravimetric analysis, differential scanning calorimetry, dynamic mechanical analysis, and mechanical tensile tests. For the products cured using the glycoluril crosslinkers, the glass transition temperature (T_g) and the maximum temperature of thermal decomposition (T_max) were 54–59 °C and 395–409 °C, respectively, being higher than those for the cured product prepared with PEMB and TAIC as the conventional crosslinkers. The elasticity (75–139 MPa), the maximum strength (3.0–4.1 MPa), and the adhesion strength (6.7–10.7 MPa) for the polymers cured with the glycoluril crosslinkers, determined by the mechanical tensile and single lap-shear adhesion tests, were higher than those for cured materials produced with PEMB. Thus, the thermal and mechanical properties of the maleimide copolymers were efficiently enhanced by crosslinking using the rigid glycoluril compounds. © 2020 Wiley Periodicals, Inc. J. Polym. Sci. 2020 , 58, 923–931     

Thermoset modified with polyethersulfone: Characterization and control of the morphology

Thermoset (TS) epoxy resins can be toughened with a thermoplastic (TP) for high-performance applications. The final structure morphology has to be controlled to achieve high mechanical properties and high impact resistance. Four polyethersulfone-modified epoxy resins are considered. They consist of different epoxy monomer structure (TGAP, triglycidyl-p-aminophenol and TGDDM, tetraglycidyl diaminodiphenylmethane) and a fixed amount of thermoplastic, and they are cured with two different amounts of curing agent. A reaction-induced phase separation occurs for all formulations generating morphologies, different in shapes and scales. The aim is to control the final morphology and in particular its dominant length scale. This morphology depends on the phase separation process, from the initiation to its final stage. The initiation relies on the relative miscibility of the components and on the stoichiometry between epoxy and curing agent. The kinetics depends on the viscosity of the systems. The different morphologies are characterized by electron microscopy or neutron scattering. Dynamic mechanical analysis allows confirming the presence of a phase separation even when it is not observable by electron microscopy. Vermicular morphologies with few hundreds nanometer width are obtained for the systems containing the TGAP as epoxy monomer. Systems formulated with TGDDM presents morphologies on much smaller scale of order a few tens of nanometers. We interpret the different sizes of the morphologies as a consequence of a larger viscosity for the TGDDM systems as compared to the TGAP ones rather than by a latter initiation of phase separation.     

Preparation of polymethyl methacrylate with well-controlled stereoregularity by anionic polymerization in an ionic liquid solvent

This study investigates the effect of ionic liquids (ILs) on the anionic polymerization of methyl methacrylate (MMA). Polymethyl methacrylate (PMMA), an isotactic polymer, is prepared by anionic polymerization at a high reaction temperature with an IL that acts as both solvent and additive. The most plausible reaction mechanism is determined using ¹H NMR and Fourier-transform infrared spectroscopy. The electrostatic interaction between MMA and the IL increases the apparent steric hindrance in MMA, resulting in the isotactic PMMA.     

In Situ Metal-Assisted Ligand Modification Induces Mn4 Cluster-to-Cluster Transformation: A Crystallography,Mass Spectrometry,and DFT Study

Dehydration of (S,S)-1,2-bis(1H-benzo[d]imidazol-2-yl)ethane-1,2-diol (H₄L) to (Z)-1,2-bis(1H-benzo[d]imidazol-2-yl)ethenol) (H₃L′) was found to be metal-assisted, occurs under solvothermal conditions (H₂O/CH₃OH), and leads to [Mn^II₄(H₃L)₄Cl₂]Cl₂ ⋅ 5 H₂O ⋅ 5 CH₃OH ( Mn₄L₄ ) and [Mn^II₄(H₂L′)₆(μ₃-OH)]Cl ⋅ 4 CH₃OH ⋅ H₂O ( Mn₄L′₆ ), respectively. Their structures were determined by single-crystal XRD. Extensive ESI-MS studies on solutions and solids of the reaction led to the proposal consisting of an initial stepwise assembly of Mn₄L₄ from the reactants via [MnL] and [Mn₂L₂] below 80 °C, and then disassembly to [MnL] and [MnL₂] followed by ligand modification before reassembly to Mn₄L′₆ via [MnL′], [MnL′₂], and [Mn₂L′₃] with increasing solvothermal temperature up to 140 °C. Identification of intermediates [Mn₄L_xL′_6−x] (x=5, 4, 3, 2, 1) in the process further suggested an assembly/disassembly/in situ reaction/reassembly transformation mechanism. These results not only reveal that multiple phase transformations are possible even though they were not realized in the crystalline state, but also help to better understand the complex transformation process between coordination clusters during “black-box” reactions.     

Transition-Metal-Free Multiple Functionalization of Piperidines to 4-Substituted and 3,4-Disubstituted 2-Piperidinones

Remote and multiple functionalization of piperidines without the use of transition-metal catalysts and elaborate directing groups is one of the major challenges in organic synthesis. Herein is reported an unprecedented two-step protocol that enables the multiple functionalization of piperidines to either 4-substituted or trans-3,4-disubstituted 2-piperidones. First, by exploiting the duality of TEMPO reactivity, which under oxidative and thermal conditions fluctuates between cationic and persistent-radical form, a novel multiple C(sp³)-H oxidation of piperidines to α,β-unsaturated 2-piperidones was developed. Second, the intrinsic low reactivity of the unsaturated piperidones toward conjugated Grignard additions was overcome by using trimethylsilyl chloride (TMSCl) as Lewis acid. Subsequently, conjugated Grignard addition/electrophilic trapping protocol provided substituted 2-piperidone intermediates, some of which were then transformed into pharmaceutical alkaloids.     

Growth of ZIF-8 MOF Films with Tunable Porosity by using Poly (1-vinylimidazole) Brushes as 3D Primers

This work reports on a novel and versatile approach to control the structure of metal–organic framework (MOFs) films by using polymeric brushes as 3D primers, suitable for triggering heterogeneous MOF nucleation. As a proof-of-concept, this work explores the use of poly(1-vinylimidazole) brushes primer obtained via surface-initiated atom transfer radical polymerization (SI-ATRP) for the synthesis of Zn-based ZIF-8 MOF films. By modifying the grafting density of the brushes, smooth porous films were obtained featuring inherently hydrophobic microporosity arising from ZIF-8 structure, and an additional constructional interparticle mesoporosity, which can be employed for differential adsorption of targeted adsorbates. It was found that the grafting density modulates the constructional porosity of the films obtained; higher grafting densities result in more compact structures, while lower grafting density generates increasingly inhomogeneous films with a higher proportion of interparticle constructional porosity.